Domino G Series Скачать руководство пользователя страница 70

Страница: 70 / 172

Auto Jet (Nozzle Purge)

Auto jet is intended for use with fast drying inks and in high temperature or dirty environments. It

is designed to prevent ink from drying in the nozzles and causing missing prints, when the

production line re-starts after a temporary pause.
When an auto jet purge happens, very small quantities of ink will be ejected out of the cartridge

nozzles. Ink may mark items that are close to the print head.

Notes

It is recommended to always enable this function, to make sure printing

quality remains high.

2. The recommended

Timer (s)

value is between 15 and 20 seconds.

2.
3. The auto jet function will run when printing and not printing.

3.
4. Auto jet is different from the purge function. Auto jet will automatically purge

the nozzles at regular times. Purge is a manual function.

To enable and setup auto jet:

1. From the

Home

screen, select the

Settings

icon:

2. Select the

System Settings

icon:

2.
3. Turn

Auto jet

On.

3.
4. Adjust the

Timer (s)

value to set the time between each auto jet purge in seconds.

4.
5. Adjust the

Column count

value to set the number of columns for purging.

INSTALLATION

EPT077343 EN - Issue 1 - 11 November 2022

Содержание G Series













































































































































































Результаты поиска

Содержание G Series

Отзывы:

Domino G Series, Руководство по эксплуатации продукта, Страница: 70 / 172

Результаты поиска

Содержание G Series

Отзывы: