Domino G Series страница 116 Скачать руководство пользователя

Страница: 116 / 172

Setting Name

Description

X (mm)

Set the horizontal position of the object in the template.

Y (mm)

Set the vertical position of the object in the template.

Width (mm)

Set the width of the object.

Height (mm)

Set the height of the object.

Scale mode

Set the scale mode of the object:

•

Scale - The width and height of the object can be set

•

independently.

•

Auto size - The width and height of the object is

•

controlled by the font size.

Angle

Rotate the object.

Lock

Lock the object to prevent it from being edited.

Visible

Make the object printable or not printable.

Font family

Set the font type.

Size (pt)

Set the font size.

Style

Choose:

•

Bold

•
•

Italic

•
•

Underlined.

•

Text align

If the object has more than 1 line, set the alignment:

•

Left

•
•

Center

•
•

Right.

•

Remove blank line

Remove blank lines from the object.

Remove leading space

Remove leading spaces from the object.

18. In the

Database

tab, use the settings listed below to change database object settings:

18.

Name

Description

Remove source

Note

This setting is only visible, if a database source

is selected.

Disconnect the object from the current database source. This

lets a new database source be selected.

Load database

Load a database file from a connected USB memory device.

Load VDC

Load and setup a variable database connection source.

Source

This is a list of items that are available to add to the database

object. To add an item to the database object, use the arrow

icons to move it to the

Destination

list.

Destination

This is a list of items that have been added to the database

object. To remove an item from the database object, use the

arrow icons to move it to the

Source

list.

OPERATION

116

EPT077343 EN - Issue 1 - 11 November 2022

Содержание G Series













































































































































































Результаты поиска

Содержание G Series

Отзывы:

Похожие инструкции для G Series

Бренды по названию

Популярные бренды

Domino G Series, Руководство по эксплуатации продукта

Результаты поиска

Содержание G Series

Отзывы:

Похожие инструкции для G Series

Бренды по названию

Популярные бренды