manualshive.com logo in svg

Domino G Series, Руководство по эксплуатации продукта, Страница: 16 / 172

Поделиться
Скачать
Domino G Series Скачать руководство пользователя страница 16

PRODUCT/BATTERY END OF LIFE

WARNING

Flammable material. Risk of fire or explosion.

 

Do not dispose of the battery in a fire, hot oven, by mechanically

crushing or cutting.

Obey local waste regulations when disposing of batteries.

Do not store or leave the battery in high or low extremes of

temperature

.

Do not store or leave the battery in a location that is subject to low

air pressure at high altitudes

.

CAUTION

Hazardous Material. Risk of damage to equipment and environment.

The battery is not removable.If the battery needs replacement, replace the PCB

that the battery is installed on. Obey local waste regulations when disposing of

the battery and PCB.

Recycling information in accordance with the WEEE and Battery Directives

Product Mark

Battery Mark

European Union Only

The product/battery is marked with one of the above recycling symbols. It indicates that at the

end of life the product/battery, you should dispose of it separately at an appropriate collection

point and not place it in the normal domestic waste stream.

USA STATE OF CALIFORNIA BATTERY STATEMENT

Perchlorate Material - special handling may apply.
See 

www.dtsc.ca.gov/hazardouswaste/perchlorate

HEALTH AND SAFETY

16

EPT077343 EN - Issue 1 - 11 November 2022

Содержание G Series













































































































































































Отзывы:

Нет отзывов