Domino G Series Скачать руководство пользователя страница 142

Страница: 142 / 172

Add a Shift Code Object

To add a shift code object object to the label template:

1. Select the

Object

icon:

1.
2. Select

Shift code.

2.
3. Adjust the settings listed below:

Name

Description

Code

Enter the name of each shift (0-5 characters). The shift name

will be printed.

Time (24 hour)

Enter the start time of each shift. The time will not be printed.

Content

Display a preview of the object.

4. Select

OK.

4.
5. Drag the object to a suitable location in the template, or use the arrow icons to reposition

the object:

6. To change the object's appearance, select the properties icon:

Note

The properties icon is not used, if the web browser interface is being used.

7. In the

General

tab, use the settings listed below to change the object's general

appearance:

Setting Name

Description

X (mm)

Set the horizontal position of the object in the template.

Y (mm)

Set the vertical position of the object in the template.

Width (mm)

Set the width of the object.

Height (mm)

Set the height of the object.

Scale mode

Set the scale mode of the object:

•

Scale - The width and height of the object can be set

•

independently.

•

Auto size - The width and height of the object is

•

controlled by the font size.

Angle

Rotate the object.

Lock

Lock the object to prevent it from being edited.

Visible

Make the object printable or not printable.

OPERATION

142

EPT077343 EN - Issue 1 - 11 November 2022

Содержание G Series













































































































































































Результаты поиска

Содержание G Series

Отзывы:

Domino G Series, Руководство по эксплуатации продукта, Страница: 142 / 172

Результаты поиска

Содержание G Series

Отзывы: