Domestic CoolAir SP950I, Руководство по установке

Страница: 16 / 324

EN
Installation CoolAir SP950I
16
6 Installation
A
6.1 Prescribed installation method
The condenser unit (fig.
2
2, page 3) is attached to the firm and straight rear
panel of the cab or by means of a firm fastening frame. The evaporator unit
(fig.
2
1, page 3) is fitted on the inside of the rear panel of the cab.
The evaporator unit must be installed in an upright position (fig.
3
, page 3).
I
The parking cooler consists of the following components (fig.
2
, page 3):
•
CoolAir SP950C condenser unit ( 1 )
•
CoolAir SP950I rear panel evaporator unit ( 2 ) with connecting line ( 3 )
NOTICE!
The parking cooler may only be installed by qualified personnel from a
specialist company. The following information is intended for specialists who
are familiar with the guidelines and safety precautions to be applied.
NOTE
The connection line (fig.
2
3, page 3) can only be installed after fitting the
evaporator unit and the condenser unit.
SP950I--I-16s.book Seite 16 Mittwoch, 1. Februar 2017 8:14 20