Domestic CoolAir SP950I, Руководство по установке

Страница: 13 / 324

13
EN
CoolAir SP950I Safety instructions
•
Installation, maintenance and repair work may only be carried out by
qualified personnel from a specialist company who are familiar with the
risks involved and the relevant regulations.
•
Do not use the parking cooler near flammable fluids or in closed rooms.
•
Do not reach into air grilles or ventilation nozzles or insert any foreign objects
in the system.
•
Do not open the system in the event of a fire. Use approved extinguishing
agents instead. Do not use water to extinguish fires.
•
Switch off the parking cooler before using automatic washing equipment
(automatic car washes etc.) to clean the vehicle.
•
Disconnect all connections to the power supply when carrying out work on
the device.
•
The system must be switched off before you tilt the cab.
2.2 Handling electrical cables
•
The electrical cables might be laid over sharp edges. Use ducts or tubes to
prevent damage.
•
Do not lay loose or bent cables next to electrically conductive materials
(metal).
•
Do not pull on the cables.
•
Attach and lay the cables in such a manner that they cannot be tripped over
or damaged.
•
The electrical power supply may only be connected by a specialist work-
shop.
•
Fit a fuse of 25 A to the connection to the vehicle's power supply.
•
Never lay power supply lines (battery leads) in the vicinity of signal or control
cables.
SP950I--I-16s.book Seite 13 Mittwoch, 1. Februar 2017 8:14 20