DOLD SAFEMASTER PRO UG 6951, Руководство пользователя

Страница: 21 / 60

Configurable safety system SAFEMASTER PRO - Fieldbus module
21
0265998 / 16.05.19 de / 101A
EXAMPLES OF DIAGNOSTICS
Example 1
Example 3
In the example 1 shown in Figure 3, Input 1 (connected
to module UG 6911.10) is tested with the UG 6911.10-
T1 test signal.
During wiring, the 24 V DC is connected to input 1 ins-
tead of the UG 6911.10-T1 test signal.
- The I/O index and Diagnostic code show the follo-
wing values: 1 - 10 to indicate the diagnostics on
input 1 of module UG 6911.10 (OUT_TEST error).
The example 3 is similar to example 1, except in this
case Input1 is connected to module UG 6913.16 and is
tested with the UG 6913.16-T1 test signal.
During wiring, the 24 V DC is connected to input 1
instead of the UG 6913.16-T1 test signal.
- The I/O index and Diagnostic code show the
following values: 1 - 20 (OUT_TEST error) to
indicate the diagnostics on input 1 of module UG
6913.16.
In this example, the I/O index corresponds to the
logical block and not to the physical terminal on module
UG 6911.10.
The two-hand element connected to the Input 1 and
Input 2 physical terminals corresponds to I/O index No.
1 and the emergency stop connected to the Input 3
and Input 4 terminals corresponds to I/O index No. 2.
In the example 4 the manual reset function is enabled
on OSSD 1.
The E-Stop-button connected to input 1 is released
without sending a reset command.
The I/O index and Diagnostics code show the
following values: 192 - 2
- To indicate the OSSD 1A/1B (see table "1. Byte:
Number of Input / Output 2": 192 = first output).
- To indicate the diagnostic code (see table "
OSSD
diagnostic"
: 2 = Waiting for OSSD to restart).
Index I/O 1
Index I/O 2
Example 2
Example 4