DOGA MDT Series, Инструкция по эксплуатации

Страница: 50 / 84

Instructions manual / MDT Series & MDTC38
60429 08/21 50
Selection on panel
Unit Range Initial
OFF- ON ON
Description OFF : disable touch screen
ON : allow touch screen use
Reverse lock (handheld only)
Unit Range Initial
YES - NO NO
Description YES will disable the reverse rotation switch on screwdriver.
Trigger start (handheld only)
Unit Range Initial
YES- NO NO
Description Trigger ( ) start Enable/Disable with start lever
Reverse start (handheld only)
Unit Range Initial
YES - NO NO
Description Reverse rotation switch can start the screwdriver in reverse by pushing
it and stops by moving it back
Preset/Model # display when power on
Unit Range Initial
0 ~ 15 1
Description Choice of initial preset or model selection on display when power on.
0 : select same preset/model as before power off
RS232 select
Unit Range Initial
MODBUS - Barcode MODBUS
Description RS232 Port use : for data report or barcode reader
Please ensure that baudrate is set to correct value
Comport baudrate setting
Unit Range Initial
bauds 9600 ~ 230400 115200
Description RS232 communication speed
To be set as computer com port :115200 bauds for ParaMon
or barcode reader setting : 9600 bauds
Auto data output
Unit Range Initial
YES - NO NO
Description Fastening data output automatically on every events as like run,
For/Rev change, torque up, preset change, etc.
Monitoring data come out through RS232 or Ethernet
without data request command
Auto data output port
Unit Range Initial
RS232 - Ethernet RS232
Description Data output port selection for automatic report
Auto data should be also set on
Protocol
Unit Range Initial
MODBUS - OPEN MODBUS
Description MODBUS : Communication protocol MODBUS on COM PORT
OPEN : Communication protocol OPEN PROTOCOL
Refer to Protocol manual