30
DC-ITD-CL4andCL8MAN01.A
www.dodtec.com
NOV 2018
815-788-5200
CL4 & CL8 Manual
Figure 5.9
Touch the ‘BACK’ button to
return to the setup menu.
5.2.5 Calibration Factors
Touching the ‘CALIBRATION FACTORS’ button o
n the setup screen brings up the screen shown in figure 5.10
This screen requires administrator password access. Contact DOD (see chapter 7) for information on the use
of Calibration Factors.
Figure 5.10
*
NOTE
: There may be a slight delay between the time the knob is turned, and the
updated reading is reflected on the screen. Adjust the knob slowly and wait a few
seconds to verify that the level is accurate.
Adjust flow to
this level.
