176
Overseas use
S
O-01C_English
･
In the country Daylight saving time is
adopted, check if the displayed time in
Standby is different from the current time.
Time correction cannot be used depending
on the overseas telecommunications carrier.
･
Date & time (P.103)
About inquiries
･
For loss or theft of the FOMA terminal or
UIM, immediately contact DOCOMO from
the spot to take the necessary steps for
suspending the use. For inquiries, see the
last page of this manual. Note that you are
still liable for the call and communication
charge incurred after the loss or theft
occurred.
･
For using from land-line phone, entering
"International call access code" or
"Universal number international prefix" for
the country is needed.
After returning to Japan
When you return to Japan, the FOMA terminal
is connected to FOMA network automatically.
If connection is failed, perform the following
operations.
･
Set "Preferred network mode" of "Network
Mode" to "GSM/WCDMA preferred". P.177
･
Set "Search mode" to "Select automatically"
in "Network operators" settings. P.176
Confirming and switching the
network search mode
By default, network search mode is set to
"Select automatically". When you connect
manually to an overseas network operator
conducted in flat-rate service, confirm the
search mode with the following operations
and switch to "Select manually".
1
From the Home screen, press
t
and tap [Settings].
2
Tap [Call settings]
X
[Network
operators].
3
Tap [Search mode]
X
[Select
manually].
4
From "Available networks", tap a
network to use.
･
To display available networks, tap
[Search networks].
❖
Information
･
If you set a network manually, the FOMA terminal is
not reconnected to another network automatically
even if you move out of the network area.
･
To return to "Select automatically", tap [Select
automatically] in Step 3.
SO-01C_E.book 176 ページ ２０１１年３月１０日 木曜日 午後２時７分
