
e07_1_pr17.fm
[80/101]
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
80
Others
Accessing the “i-mode fault diagnosis site”
i-mode site: [iMenu]
/
[
お客様サポー
ト
] (user support)
/
[
お問い合わせ
]
(inquiries)
/
[
故障・電波状況お問い合わ
せ先
] (inquiries about fault/signal
status)
/
[
iモード故障診断
] (i-mode
fault diagnosis)
Overseas use is charged.
Connect the FOMA terminal to the network
and check for software update. If necessary,
the handset downloads a part of software by
using packet communication and updates
the software.
If updating software is necessary, check the
DOCOMO website or “
お客様サポート
” (user
support) (in Japanese only) on iMenu for
updates. When updating, select “Auto-update”,
“Now update” or “Reserve”.
You can update software even if the FOMA
terminal contains phonebook, camera image,
downloaded data, etc. However, DOCOMO may
not be able to protect data that could be lost due
to malfunction, damage, water exposure and so
on. It is recommended that important data be
backed up before software update. Note that
some data, such as downloaded data, cannot be
backed up.
C
Using software update
Do not remove the battery pack while updating
software. Failure to update software may occur.
Fully recharge battery before updating software.
Updating (downloading and rewriting) software
may take time.
Making or receiving calls, each communication
function, Clean Up and other functions cannot
be used while updating software (Receiving
voice calls is possible during download).
It is recommended to update software at a
location with a strong signal (three bars for the
antenna icon) while you are not moving. If signal
becomes weak or download is interrupted when
downloading software, update software again in
a location with good signal conditions.
When updating software, the information unique
to the FOMA terminal (model, serial number,
etc.) is automatically sent to the server
(DOCOMO software update server). Sent
information is only used for software update.
If software update fails, [Rewrite failed] appears
and no operations are available. In this case,
bring the FOMA terminal to a repair counter that
DOCOMO specifies.
When the software is automatically downloaded,
[
] appears in the stand-by display.
1
[
] appears in the stand-by
display
/
t
/
select [
]
2
Select the rewriting method
To confirm settings: [OK]
To change settings: [Change]
To start rewriting: [Now rewrite]
Updating software
QR code to
connect to the
site
Starting software update from icon
pr17_ue.book 80 ページ 2012年11月22日 木曜日 午前8時43分