Manual for PC Connection_PR17.fm
16
This section describes how to set up packet communication and 64K data communication without using
DOCOMO Connection Manager.
To make the settings, communication software for entering AT commands are required. “Hyper terminal”
is used here.
The flow for setting up with use of AT commands is as follows.
To use 64K data communication, there is no host (APN) setting.
For Windows 7 or Windows Vista, “Hyper terminal” is not included as standard. Use compatible software to
set up communications (follow the instructions for the software).
Set the host (APN) for using packet communication. Register up to ten numbers. Hosts are managed
using cid numbers from 1 to 10 (
n
P. 17). The default setting for cid1 is “mopera.net”, the APN used to
connect to mopera U (<PDP_type> is “PPP”). The default setting for cid3 is “mopera.net”, the APN used
to connect to mopera U (<PDP_type> is “IP”). The default setting for cid4 is “mpr.ex-pkt.net”, the APN
used to connect to mopera U (<PDP_type> is “PPP”). Save hosts (APN) to cid2, 5 to 10.
The registered cid is the connection number set in the dial-up connection settings.
Contact the Internet service provider or network administrator for hosts (APNs) other than mopera U.
Example: Using FOMA USB Cable with Charge Function 02 (sold separately) on Windows XP
1
Connect the FOMA terminal to your PC via FOMA USB Cable with Charge
Function 02.
2
Select [
スタート
] (Start) menu
/
[
すべてのプログラム
] (All programs)
/
[
アクセ
サリ
] (Accessories)
/
[
通信
] (Communications)
/
[
ハイパーターミナル
] (Hyper
terminal).
:
Hyper terminal starts up.
Set network transmission without using DOCOMO
Connection Manager
Setting communications for packet communication and 64K data
communication
Install the FOMA communication configuration file before making settings for packet communication and 64K data
communication (
n
P. 6).
AT commands are commands for controlling the modem. The FOMA terminal is compliant with AT commands and
also supports some extended commands, as well as some unique AT commands.
Making host (APN) settings is not necessary when using mopera U, the DOCOMO Internet connection service, since
it is set as the default.
Set Notify caller ID as necessary (When using mopera U, set [Send]). The default setting is [Not send].
Set other settings as necessary. Use is possible with the default settings.
Setting host (APN)
Set the Dial-up Network
(
n
P. 19)
Set the host (APN)
(
n
steps 6 and 7 on P. 17)
Set the Send/Not send caller ID
(
n
P. 18)
Start up communication software that supports AT commands (steps 2 to 5)
End communication software (
n
step 7 on P. 18)
Manual for PC Connection_PR17.fm 16 ページ ２０１２年１１月２２日 木曜日 午前８時５０分
