19
Manual for PC Connection_PR17.fm
■
Send/Not send setting on dial-up networks
Adding “186” (Send) and “184” (Not send) to the host number in dial-up networks is also possible.
Setting “186” (Send) and “184” (Not send) in both the
*
DGPIR command setting and the dial-up network setting
results in the following.
Enter “AT
*
DGPIR=0” to return “186” (Send)/“184” (Not send) to [Not set] (default setting).
Set [Send] for sending caller ID when using mopera U, the DOCOMO Internet connection service.
Set the host and TCP/IP protocol. Contact the Internet service provider or network administrator for
details on settings.
■
Hosts
For packet communication, set the host (APN) in advance. Register numbers (cid) 1 to 10 for the host (APN) in
advance, to enable using packet communication by specifying control numbers. Host (APN) settings are the
equivalent to a phonebook for packet communication on a PC. Compared to normal phonebook entries, they
appear as follows.
For example, when the mopera U host (APN), “mopera.net”, is registered for cid1, connecting to the mopera U is
possible by specifying the host number “
*
99
***
1#”. Other registered cids can be used similarly.
*
99
***
1#
: Connects to host (APN) registered to cid1. Alternatively, connect with just
*
99#.
*
99
***
2#
: Connects to host (APN) registered to cid2.
to
*
99
***
10# : Connects to host (APN) registered to cid10.
The default setting for cid1 is “mopera.net”, the APN used to connect to mopera U (<PDP_type> is “PPP”). The
default setting for cid3 is “mopera.net”, the APN used to connect to mopera U (<PDP_type> is “IP”). The default
setting for cid4 is “mpr.ex-pkt.net”, the APN used to connect to mopera U (<PDP_type> is “PPP”). When
connecting to a corporate LAN or Internet service providers other than mopera U, register the host (APN) using
cid2, 5 to 10 (
n
P. 17).
For 64K data communication, enter the access point phone number supplied by the Internet service provider or
network administrator.
Contact the Internet service provider or network administrator for more information on settings.
Access point phone number is “
*
8701” for mopera U when using 64K data communication.
When using packet communication, enter “
*
99
***
3#” for mopera U (default setting).
Dial-up network setting
(when <cid>=2)
Using the
*
DGPIR command Send/
Not send setting
Send/Not send caller ID
*
99
***2
#
Not set (default setting)
Send
Not send
Not send
Send
Send
184
*
99
***2
#
Not set (default setting)
Not send
(dial-up network “184” is given priority)
Not send
Send
186
*
99
***2
#
Not set (default setting)
Send
(dial-up network “186” is given priority)
Not send
Send
Setting dial-up network
In phonebook
In Packet communication setting
Registered number (memory number)
Control numbers (cids) 1 to 10
Other party’s name
Host name (host (APN))
Other party’s phone number
*
99
***
<cid>#
Manual for PC Connection_PR17.fm 19 ページ ２０１２年１１月２２日 木曜日 午前８時５０分
