Docomo SH-03E, Инструкция по эксплуатации

Страница: 43 / 157

e02_pr17.fm
[41/43]
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
41
Basic Operation
You can set two security codes, PIN1 code and
PIN2 code, on the docomo mini UIM card.
The PIN1 code is a four- to eight-digit security code
that is entered when a docomo mini UIM card is
inserted in the FOMA terminal or when the FOMA
terminal is turned on to prevent unauthorized use
by a third party. Making/Receiving a call and the
handset operation are enabled by entering the
PIN1 code. The PIN2 code is a four- to eight-digit
security code that is entered for performing
operations such as resetting total call charges.
If you enter the wrong PIN1 code or PIN2 code
three times continuously, it is locked.
C
Setting PIN code
1
In the Normal menu, [Setting]
/
[Lock/Security]
/
[UIM setting]
2
Select an item
;
[Change PIN1 code]
/
enter the terminal
security code
/
enter the current PIN1
code
/
enter the new PIN1 code
/
enter
the new PIN1 code again
/ C
• When PIN1 entry ON/OFF is set to [OFF],
you cannot change the PIN1 code.
;
[Change PIN2 code]
/
enter the terminal
security code
/
enter the current PIN2
code
/
enter the new PIN2 code
/
enter
the new PIN2 code again
/ C
;
[PIN1 entry ON/OFF]
/
[ON]
/
enter the
PIN1 code
• You can set to enter the PIN1 code when
the power is turned on.
C
Disabling PIN lock
1
In the PUK entry screen, enter PUK
(eight-digit number) while the PIN
is locked
2
Enter a new PIN code
3
Enter the new PIN code again
4
C
PUK is an eight-digit number used to disable the
PIN1/PIN2 code lock.
If you enter the wrong code ten times
continuously, the docomo mini UIM card is
completely locked. In this case, contact a
docomo Shop.
PIN1 code/PIN2 code
(At subscription: 0000)
PUK (PIN Unlock Key)
Various lock functions
Lock
function
Operation/Restriction
All lock Prevents all operations other than
power on/off and answering voice/
videophone calls.
Enable: In the Normal menu,
[Setting]
/
[Lock/Security]
/
[Lock
settings]
/
[All lock]
/
enter the
terminal security code
Disable: In stand-by, enter the
terminal security code
You cannot change the code.
pr17_ue.book 41 ページ ２０１２年１１月２２日 木曜日 午前８時４３分