Appendix/Index
150
●
Display flickers.
If [Auto brightness adjust] of the screen brightness
setting is marked, display backlight automatically
changes according to the ambient brightness. The
screen may seem to be flickering then.
→
P71
●
There are dots which are always or never lit on the
screen.
Display is manufactured by taking advantage of highly
advanced technology but some dots may be always or
never lit. Note that, this shows characteristics of liquid
crystal displays and not defects in the terminals.
●
The display has afterimages.
• If the battery pack is removed from the terminal
before the terminal power is turned OFF,
afterimages may remain. Attach/Remove the
battery pack after turning OFF the power.
• If the same screen is displayed for a while,
afterimages of that screen may remain even after
changing the screen for a certain operation.
●
Fingerprint authentication is unavailable when
connecting terminal with a PC, etc.
When connecting the terminal using a USB cable to a
device which requires grounding such as a desktop
PC, make sure that the device is grounded in advance.
If the connected device is not grounded, fingerprint
authentication may be unavailable. In this case,
perform fingerprint authentication while touching a
metallic part (frame, external connector, etc.) of the
connected device or after disconnecting the terminal
from the device.
●
Data saved in the USB mass storage are not
displayed.
Remove and then attach the USB mass storage again.
●
No sound comes out.
If the stereo earphone plug is removed from the
earphone jack while watching 1Seg or playing
contents in Media Player, playing is paused or muted.
◆
Error messages
●
Please wait for a while
• Phone line or packet communication facilities are
broken down or line or packet communication
network is very busy. Wait a while and then operate
again.
• You can call 110, 119, and 118. However you may
not get through depending on the situation.
●
Please wait for a while (Packet)
Packet communication facilities are broken down or
packet communication network is very busy. Wait a
while and then operate again.
●
Cannot activate the fingerprint sensor.
It appears when the fingerprint sensor does not work
properly. If the fingerprint sensor is disabled, please
contact a docomo Shop near you.
●
Low Battery Level. Shutdown the device.
Battery level is low. Charge the battery.
→
P29
●
Incorrect PIN code! Attempts Remaining
：
X
Displayed when a wrong PIN code is entered. Enter
the correct PIN code.
→
P77
●
Enter PIN code
Displayed when you turn on the terminal with PIN
code enabled. Enter the correct PIN code.
→
P77
●
No SIM card.
Displayed when docomo mini UIM card is not inserted
correctly. Check if the docomo mini UIM card is
inserted to the terminal correctly. If the docomo mini
UIM card is not inserted correctly, calls including
emergency calls (110, 119, 118) cannot be made in
Japan.
●
SIM card removed
Unable to recognize this card. Will reboot. Unclean
metal part of SIM card may cause reboot. Regular
cleaning recommended. Clean with dry cotton swab.
It may appear if metal part of docomo mini UIM card
is dirty, but it is not malfunction. Clean the metal part
of docomo mini UIM card regularly.
Содержание REGZA T-02D
Страница 1: ...T 02D INSTRUCTION MANUAL 12 7 ...
