Docomo REGZA T-02D, Инструкция по эксплуатации

Страница: 148 / 174

Appendix/Index
146
● The terminal cannot be charged.
• Is the battery pack installed correctly? → P27
• Is the adapters power plug or cigarette lighter plug
inserted to the outlet or cigarette lighter socket
correctly?
• In case of using the included AC Adapter F06, is the
plug of microUSB cable connected to the terminal
and AC adapter correctly?
→
P31
• Is the charging jack of the terminal dirty when you
use included Desktop Holder? If it is dirty, clean it
with a dry cloth or cotton swab.
• Is a PC turned on when you use the PC connection
USB cable T01 (optional)?
• If you call, perform communication or operate
functions for a long time while charging the battery,
temperature of the terminal may be raised and the
indicator LED (red) may turn off. In high
temperature status, the terminal stops charging for
safety. Wait a while until the temperature is lowered
and retry to charge.
• Charging may not start where the temperature is low.
Charge the terminal with the power ON. If the battery is
not charged even when the terminal power ON or the
terminal cannot be powered ON, keep away from the
place where the temperature is low.
■
Operations/Display
●
Turning the power off or restarting automatically
happens.
If the jack of battery pack is dirty, the contact may
become poor and the power may shut OFF. If it is
dirty, clean with a dry cotton swab.
●
No operations are performed even by pressing
button.
Is the terminal in sleep mode? Cancel sleep mode by
pressing
X
or
B
. → P36
● The operation time provided by the battery pack is
short.
• Is the terminal left for a long time under the state of
out of service area? Out of service area, a lot of
power is consumed to search available radio waves.
• The operation time provided by the battery pack
varies by the operating environment and battery
pack's deterioration.
• The battery pack is a consumable part. Each time it
is charged, time available with each charging
reduces. Even the full charge state, when the
operation time is too short, purchase a new battery
pack of the specified type.
●
The docomo mini UIM card is not recognized.
Is the docomo mini UIM card installed in the right
direction?
→ P25
● The screen reacts slowly when a touch panel is
tapped/button is pressed.
When large amount of data is saved in the terminal or
transferring large-size data between the terminal and
microSD card, the reactions on the screen may be
delayed.
● The terminal, etc. become hot while operating/
charging.
While operating or charging, or if you call or watch
1Seg, etc. for a long time while charging the battery,
the terminal, battery pack and adapter may become
hot. There is no problem about safety and continue to
use them.
● The terminal becomes hot and the power turns OFF.
If you activate several applications, use camera,
connect to the Internet for a long time while charging
the battery, etc., temperature of the terminal may be
raised. When the terminal is in high temperature state
for a long time, charging or functions may stop or may
adjust brightness of the display. And the power of the
terminal may shut down to prevent you from burns.