Segatrici
S.r.l
Instruction Manual
Pag.20
Edition A
12. MACHINE USE, CALIBRATION E TUNE-UP.
Please, read carefully Exhibit A10 to obtain the best results from your saw.
12.1. H
OW TO USE THE MACHINE
12.1.1 Starting the machine
•
Turn the disconnect switch
•
Switch the key-selector to ON
•
Press the hydraulic pus button
12.1.2 Adjusting the blade speed
By turning the blade speed knob on the control panel, the operator adjusts the blade speed. A read-out instrument shows the
present speed of the blade.
12.1.3. Feeding the saw
Always respect the safety rules feeding the material. Keep the material guided until it is not completely clamped by the vises.
12.1.4. Manual controls
The saw allows the following manual commands :
•
blade speed adjustment
•
Band drive Off/On
•
Coolant Off-On
•
Man./Auto cycle switch
•
Auto Stop-Start
•
Crop cut (optional)
•
Hydraulics
•
Index fast
•
Rear vise open/close
•
Key selector switch
•
Head up/down
•
Index Back/Fwd
•
Index vise open/close
•
Emergency stop
•
Alarms reset
The diagnostic check panel shows also :
•
hydraulic overload
•
Coolant overload
•
End of material
•
End of program
•
Blade break
•
Blade stall
•
VFD problems
