Segatrici
S.r.l
Instruction Manual
Pag.8
Edition A
•
this manual contains mistakes, errors, or something is missing;
•
the original machine is modified by the manufacturer.
Marginal errors or missing elements, if considered important for the correct work of the machine and its safe use will be im-
mediately notified through an “Errata Corrige”.
To modify this manual the manufacturer will bring all the copy of the same edition back and then new copies will be sent to
the customer.
The latest version is marked with higher letter (A, B....). The first edition is called “Edition A”.
3.5. H
OW TO OBTAIN MORE COPIES
If necessary, the customer can obtain new copies of this manual simply making a written request and mentioning on it the
machine serial number.
If copies are requested, the manufacturer has the right to be paid to issue them.
3.6. I
F THE MACHINE CHANGE OWNER
If the original customer sales the machine, he/she should notify the manufacturer that the machine changed ownership, so to
allow the manufacturer to inform the new user on the dangers and limits of liability.
3.7. S
UGGESTIONS
The customer should notify the manufacturer if improvements are necessary and where they are to increase an easy under-
standing of this manual/
4. LIABILITY LIMITS
The manufacturer cannot be responsible if the machine if used in one following ways , which are classified as inappropriate :
4.1 I
NAPPROPRIATE USE OF THE MACHINE
It has to be considered inappropriate the use of the machine if :
•
the safety rules are partially are completely unattended ;
•
what the manufacturer prescribed is not done ;
•
the a danger or injury is due to an incorrect installation or assembly of the machine, and it was not done by the customer
or under his surveillance ;
•
wrong installation of protective equipment after maintenance or service ;
•
hydraulic or electrical problems due to the producer of the component and not to the producer of the machine ;
•
big deficiency in maintenance ;
•
modifications or maintenance on the machine without authorization of the manufacturer ;
•
use of atypical tools, other than the ones suggested by the manufacturer ;
•
use of non-original spare parts, other than the one suggested by the manufacturer ;
