Segatrici
S.r.l
Instruction Manual
Pag.30
Edition A
16. REMAINING DANGERS
This machine is powered by electrical power. The manufacturer, building the machine, used the state of the art solutions
also meeting the regarding regulations to assure maximum safety to the operator.
When servicing the machine with power on to check particular electrical components, always respects the basic safety
rules. Reduce as much as possible this type of operations.
The customer is required to provide a suitable power source respecting the CEI 64-8 or other countries special rules
where the machine was installed.
17. PERSONEL TRAINING
This machine was design to be easily operated. It is not expressly required an expert to operate the saw, but an expert can
set as best as possible the machine so to obtain the maximum results.
Therefore, the operator needs a good experience in machine tools, especially in band saw machine.
The internal maintenance personnel should be able to read and understand an electrical and hydraulic schematic, and
work on the machine following the instructions contained in the schematics.
18. MACHINE DISMANTLE
This machine was built using only ecological materials. It is necessary to separately recycle only the hydraulic oils and the
coolant liquid.
19. SPARE PARTS
Attached you can find a list of spare parts.
1,001
Locknut
1,002
Plate
1,003
Cylinder head
1,004
Scraper ring
1,005
Gasket
1,006
Gasket
1,007
Gasket
1,008
Piston
1,009
Gasket
1,010
Cylinder
1,011
Tie rod
1,012
Cylinder end
1,013
Piston
1,014
Cylinder
1,015
Tie rod
1,016
Piston
1,017
Cylinder
1,018
Tie rod
1,019
Rod clamp
1,020
Locknut
1,021
Cylinder head
1,022
Scraper ring
1,023
Gasket
1,024
Gasket
1,025
Piston
1,026
Cylinder
1,027
Gasket
1,028
Fastening ring
1,029
Pressure gauge
1,030
Pressure reducer
valve
1,031
Gasket
1,032
Gasket
1,033
Cylinder end
1,034
Cylinder end
1,035
Gasket
2,001
Cylinder head
2,002
Gasket
2,003
Scraper ring
2,004
Gasket
2,005
Gasket
2,006
Rod
