DNS LK-400, Руководство по эксплуатации

Страница: 18 / 46

LK-400 Operation Manual
Auto Slide Preparation System Extension Module Package
１６
4 – 2 Starting up the Main Unit
Turn ON the power switches of the AS-410 and the LK-400 PC; boot up the both system.
4 – 3 Starting up LK-400 application
Click the icon of LK-400 on the desktop to start-up the Software.
4 – 4 Log in
The log-in screen appears after the LK-400 application starts. Enter the pre-registered ID and
password to be able to operate each mode. Ensure that the LAN cable of the AS-410 and the LK-400
PC is connected properly.
To change the user’s registration or the stain information registration, enter the administer-autorized
User ID and password, then click Login button.
⚫ Change the password from the initial value as needed for the security.
⚫ Ensure to keep and save the ID and the Password in a safe place. The system
may not be able to start again without the information.
Initial value
User ID ： admin
Password
：
pass (half size)
*User ID and password are
case-sensitive.
AS-410
power switch
LK-400 PC power switch
!
Caution
Login Screen
Start-up icon