Connection types
BeDMX2 connection
There are 1 or 2 coaxial SMA or RP-SMA connectors for antennas
capable of working both on reception and transmission.
Communication between BeDMX ports is performed according
to Bluetooth 5.0 standard.
DMX connections
XLR 5-pin connectors are used to connect DMX512 equipment
to DMX-ports of RadioGate Plus Solid. If necessary, the device can be
equipped with XLR 3-pin connectors. Each port of RadioGate Plus
Solid has 2 connectors — one M connector and one F connector,
what allows the port to pass-through the DMX bus. Using internal DIP
switches, it is possible to enable line terminators (120 ohms)
on DMX bus.
In RadioGate Plus Arma, DMX connection is made with terminal
block connectors, located inside the device case.
Ethernet connection
The device connects to the network through RJ-45 socket.
RadioGate Plus devices have one Link/Act LED to indicate
the status of the network connection.
Each device has unique IP and MAC addresses. IP address of the
device, sunbet mask, and other network parameters can be changed,
but even in this case, the device is still available at the source IP
address (2.x.x.x) for ping and http requests. Thus, even in
in case of loss of a new device IP address can be accessed
to the network using the original IP address via the web interface.
Pic. 2
Ethernet connector
Pic. 1
XLR(F) and XLR(M) DMX connectors
(5pins/3pins)
Link/Act
Push
Out 1
Push
In 1
Out 1
Push
In 1
4
RadioGate Plus
