LT
-0778 (12/04) © 2004 Digital Monitoring P
roducts, Inc.
800-641-4282
www.dmp.com
Made in the USA
INTRUSION • FIRE • ACCESS • NETWORKS
2500 North Partnership Boulevard
Springfield, Missouri 65803-8877
7000 Series Keypad Installation Sheet
Digital Monitoring Products
11
Specifications
Operating Voltage
12 VDC Nominal
Dimensions
7” W x 5.25” H x 0.5” D
Compatibility
The 7000 Series keypads are compatible with
the following Command Processor™ panels:
XRSuper6/XR20/XR40
XR200/XR200-485/XR2400F
XR500 Series/XR2500F
Listings and Approvals
Underwriters Laboratories (UL) Listed
FCC Part 15
RFID Reader FCC ID: CCKPC0086
Accessories
Backboxes
695 or 696 4” square mounting box
777 protective keypad cover
777S keypad cover spacer
Keypad Wiring Harness
300 4-wire harness
300-5 5-wire harness
300-12 12-wire harness
300-512 12-wire harness, 5 ft. long
Proximity Credentials
1306 HID Prox Patch™
1306PW HID Prox Patch™
1326 HID ProxCard II® Card
1346 HID ProxKey II® Access Device
1351 HID ProxPass®
1386 HID ISOProx II® Card
1410 DMP Proximity Card
1415 DMP Proximity PVC Photobadge
1420 DMP Proximity Key Fob
Keypad Specifications
MODEL NORM/STANDBY
CURRENT
ALARM
CURRENT
4-ZONES
INTERNAL
PROX READER
WIEGAND
INPUT
INTERNAL FORM C
DOOR STRIKE RELAY
7060
72mA
87mA
7063
85mA
100mA
X
7070
72mA + 1.6mA
per active zone
87mA + 2mA
per active zone
X
7073
85mA + 1.6mA
per active zone
100mA + 2mA
per active zone
X
X
X
X
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made by the user and not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE
: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
