DMP Electronics 7133, Руководство по установке

Страница: 29 / 40

27
END USER TRAINING
This section covers 7063/A, 7073/A, 7163, and 7173 keypads and contains three sections:
• Keypad Arming and Disarming
• Keypad Access Control
• Keypad Entry Delay
All of the examples displayed assume that CLOSING CODE is YES in panel programming.
Figures 11 through 14 show the user presenting a card to the keypad. When an external
reader is connected to a 7073/A and a 7173 keypad, the user presents a card to the reader
rather than to the keypad.
Keypad Arming and Disarming
Area System Arming and Disarming
1. Press CMD until the keypad displays ARM DISARM .
2. Press the select key under the preferred option.
3. The keypad displays ENTER CODE: - . The user presents their card to the reader.
Once validated by the system, all areas assigned to that code arm or disarm
automatically and the 7073/A and 7173 keypad door strike relay activates. See Figure 11.
Figure 11: Area Arming and Disarming
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE:
–
ABC SECURITY
ALL? NO YES
Select NO to arm or disarm individual areas.
Select YES, or simply wait, to automatically arm or disarm all areas for which you are authorized.