DMC UniDriv, Руководство пользователя

Страница: 13 / 86

13
Outer Drive UniDriv
1. Place the horizontal beam inside the bin on blocks or horses with the outer drive
mounting shaft toward the bin wall directly under the side roof hatch and the other end
directly under the center fill hatch.
2. Place a 1-1/4” I. D. washer on the outer drive mounting shaft. Slide the outer drive, with
the gearmotor already attached, onto the outer drive mounting shaft with the drive
wheels away from the beam. Place the other 1-1/4” I.D. washer onto the outer drive
mounting shaft and insert the ¼” x 2 ½” spring pin into the predrilled hole.
See Figure 2-1.
Section 2 Outer Drive
Figure 2-1 Outer Drive
1/4” x 2 1/2” Roll Pin
3FH0889
1 1/4 I.D. Washer (2)
3FH0958