manualshive.com logo in svg

DKS 1833 Series, Инструкция по установке и эксплуатации

Серия DKS 1833 - это надежные и удобные пользовательские руководства по установке и владению. Вы можете бесплатно загрузить их с нашего веб-сайта. Эти подробные руководства помогут вам быстро и легко установить и настроить ваш продукт. Посетите наш веб-сайт, чтобы скачать руководства сегодня.

Поделиться
Скачать
background image

1835-065-J-7-14

47

This adjustment is 

only

 on the 1835 wall mounts and all the 1837 models. This is adjusted at the factory and 

should 

NOT

 be adjusted in the field.

4.4 Backlite Cutoff

3 2 1

BACKLITE
CUTOFF

4.1 Speaker Volume, Microphone and Feedback

Speaker volume, microphone volume and feedback all interact with each other to affect the audio performance of the system.

1.

 Locate the 

speaker volume

, 

microphone volume

 and 

feedback

 adjustments on circuit board (see previous page).

2.

 Set the 

speaker volume

 about 1/3 from full counter-clockwise.

3.

 Set the 

microphone volume

 to 1/2.

4.

 Place a phone call from the telephone entry system to a resident. If feedback occurs, turn the speaker volume 

  counter-clockwise until it ceases.

5.

 While the tenant is still on the line, ask them to remain silent while rubbing your finger over the microphone 

  hole on the face plate. Rotate the 

feedback

 adjustment throughout its range while listening to the sound coming 

  from the speaker. When the sound is minimum, this is the correct setting.

6.

 Speaker volume and microphone volume may now be adjusted to desired levels. If both are set too loud, 

  feedback may result. For louder speaker volume, the microphone volume may need to be decreased. For louder 
  microphone volume, the speaker volume may need to be decreased.

7.

 Normal setting for both speaker volume and microphone volume is about 1/2.

8.

 After setting these adjustments, place some test calls. If feedback occurs, microphone and/or speaker volume 

  will need to be reduced.

MIC

VOL

3 2 1

FEED

BACK

3 2 1

3

2

1

SPK

VOL

4.2 Click Sensitivity - Use for Rotary-Dial Phones ONLY

1.

 Locate the 

click sensitivity

 adjustment on circuit board (see previous page).

2.

 If rotary dial phones are 

NOT

 used, set the click sensitivity to 

FULL counter-clockwise

 to disable this feature. If 

  rotary dial phones are in use, proceed to step 3.

3.

 Place a phone call from the telephone entry system to a resident with a rotary dial type phone. After they 

  answer, ask the resident to dial 9 while you adjust the click sensitivity potentiometer (the resident may have to 
  dial 9 several times for you to obtain the correct adjustment). When the door or gate opens, this is the correct 
  adjustment for the click sensitivity.

4.

 Note: Adjusting the click sensitivity too high (potentiometer fully clockwise) could cause the system to respond 

  to loud noises while it is in use. If this happens, rotate the click sensitivity potentiometer counter clockwise 1/8 
  turn and re-test the system. You may have to perform this step several times to find the correct adjustment.

CLK

SEN

LCD display is adjusted at the factory and should 

NOT

 need to be re-adjusted. If it does, Let the system run for at 

least 10-minutes before making any display contrast adjustments.

4.3 LCD Display Contrast - 1835 and 1837

1.

 Locate the 

contrast 

adjustment on your chosen model (see previous page).

2.

 Turn the contrast potentiometer clockwise to lighten, counter-clockwise to darken until the display is satisfactory.

CONTRAST

or

3

1

CONTRAST

3

1

Содержание 1833 Series







































































Отзывы:

Нет отзывов

Похожие инструкции для 1833 Series

Mackie S500 Series Owner'S Manual preview
S500 Series
Бренд: Mackie Страницы: 14
Ibiza PORT12VHF-BT Instructions Manual preview
PORT12VHF-BT
Бренд: Ibiza Страницы: 24
i3-TECHNOLOGIES i3HUDDLE User Manual preview
i3HUDDLE
Бренд: i3-TECHNOLOGIES Страницы: 19
Q Acoustics Q-TV2 Quick Start Manual preview
Q-TV2
Бренд: Q Acoustics Страницы: 19
TAD TAD-CR1 Unpacking Instructions preview
TAD-CR1
Бренд: TAD Страницы: 2
Taco 00e Series Installation/Operation Instruction Manual preview
00e Series
Бренд: Taco Страницы: 56
Harman JBL CINEMA SB130 Quick Start Manual preview
JBL CINEMA SB130
Бренд: Harman Страницы: 16
M-system R7ML-TS4 Instruction Manual preview
R7ML-TS4
Бренд: M-system Страницы: 10
Mueller Hydro-Guard HG-3 Operating Instructions Manual preview
Hydro-Guard HG-3
Бренд: Mueller Страницы: 7
Electro-Voice EVI-28 Datasheet preview
EVI-28
Бренд: Electro-Voice Страницы: 8
urmet domus 1038/40 Manual preview
1038/40
Бренд: urmet domus Страницы: 30
Contec IPC-CDD-02 User Manual preview
IPC-CDD-02
Бренд: Contec Страницы: 15
RADICAL R-C10VW1 Installation Manual preview
R-C10VW1
Бренд: RADICAL Страницы: 13
Gemini PA-300BT User Manual preview
PA-300BT
Бренд: Gemini Страницы: 20
Focal SCALA UTOPIA III EVO User Manual preview
SCALA UTOPIA III EVO
Бренд: Focal Страницы: 52
Qtx QR5A User Manual preview
QR5A
Бренд: Qtx Страницы: 4
Bose 501s Owner'S Manual preview
501s
Бренд: Bose Страницы: 8
Door Knox xVDP207 Manual preview
xVDP207
Бренд: Door Knox Страницы: 25

Бренды по названию

Популярные бренды

Загрузить еще бренды