1835-065-J-7-14
39
1.
Press and enter your four-digit MASTER CODE (
beep
).
The LCD display on the 1835 and 1837 systems will read: # OF DIRECTORY CODE DIGITS
2.
Enter 1, 2, 3 or 4 digits, then press (
beep
).
The LCD display will read: ERASE MEM? 1=Y 0=N
- If there are
10 to 99
resident names or telephone numbers, directory code
must be at least two-digits.
- If there are
100 to 999
resident names or telephone numbers, directory code
must be at least three-digits.
- If there are
1000 or more
resident names or telephone numbers, the directory code
must be set to four-digits.
3.
Entering will cancel out of this program if desired (
beeeeeep
).
Entering will change the directory code length (
and erase ALL existing memory
).
The LCD display will read: ERASING
A long beep will sound when complete (
beeeeeep
).
Directory code digit length has now been programmed.
This programming sequence sets the directory code length to 1 - 2 - 3 or 4 digits.
When
10 to 99
resident names or telephone numbers are going to be programmed, the directory code
must be at least
two-digits
, but can be 3 or 4 digits.
When
100 to 999
resident names or telephone numbers are going to be programmed, the directory code
must be at least
three-digits
, but can be 4 digits.
When
1000 or more
resident names or telephone numbers are going to be programmed, the directory code
must be set to
four-digits.
Factory setting is three (3) digits.
CAUTION:
This programming sequence will delete
ALL
phone numbers and
directory codes that have been
previously
programmed into the system.
3.5.1 Programming the Directory Code Length
??
??
??
??
00
OPER
OPER
22
ABC
ABC
00
OPER
OPER
11
SP
SP
In this programming sequence, the directory codes
AND
7-digit phone numbers will be programmed into the system. Be sure
you have programmed the directory code length that you desire as described in 3.5.1 above.
Changing the directory code
length after programming the telephone numbers will erase all the numbers and directory codes that have been
programmed
. To program phone numbers that will need to use an area code (long distance calls and 10-digit calling), program
them in 3.5.4. If you use directory codes 0, 00, 000, 0000 and/or 1, 01, 001, 0001 remember that the talk time for these
directory codes are factory set to the maximum and cannot be changed. Use these directory codes to program management or
emergency phone numbers, which generally require longer conversation periods.
Note:
If this telephone entry system is being used in
an area that requires 10-digit phone number dialing
, proceed to 3.5.3
and 3.5.4 to program the area code, phone number and directory code.
3.5.2 Programming Directory Codes with 7-Digit Phone Numbers - NO Area Code
1.
Press and enter your four-digit MASTER CODE (
beep
).
2.
Choose and enter a
directory code
(1, 2, 3 or 4 digits depending on what was programmed in 3.5.1 above), then
press (
beep
). (You cannot duplicate directory codes)
The LCD display on the 1835 and 1837 systems will read: PHONE#
3.
Enter the
seven-digit phone number
, then press (
beep
).
Note: If the number that you are entering in this step is less than seven-digits, enter # in the empty spaces after the digits
have been entered.
For example, if the system is connected to a PBX that requires four-digit extension numbers and you want to enter extension
2217, you would enter this number as 2217###, then press
*
(beep).
4.
Press together to end this programming sequence (
beeeeeep
).
??
??
??
??
11
SP
SP
00
OPER
OPER
00
OPER
OPER
Содержание 1833 Series
Страница 2: ......
Страница 69: ...1835 065 J 7 14 67...
