Important Safety Information
1.
Assemble the machine exactly as per
the instructions in this manual, using
only the supplied tools to assemble it.
2.
Check all the screws, nuts and other
connections before using the machine
for the first time and ensure that it has
been built correctly and is safe to be
used.
3.
This machine is for indoor, home use
only. Position the machine on a clear,
dry and level surface. DO NOT position
it
near water or outdoors, or in a room or
building that is not properly insulated.
4.
Place a suitable base (e.g. rubber mat,
wooden board etc.) beneath the
machine in the assembly area to protect
it from dirt.
5.
Make sure there is sufficient free space
around the cross trainer when you set it
up.
6.
Before beginning training, ensure there
is at least 1m of clearance in the front
and rear of the elliptical and 0.6m on
each side, free from any objects or
potential hazards. The minimum ceiling
height required is 2.3m.
7.
Use the machine only for its intended
purpose as described in the manual.
This machine is not suitable for
therapeutic or medical purposes.
8.
This machine may only be used by one
person at a time.
9.
Always wear appropriate workout
clothing when exercising. Aerobic shoes
are required when using this machine.
10.
Before exercising on this machine,
always warm up and do the stretching
exercises listed in this manual first.
11.
When altering any adjustable parts,
make sure they are adjusted properly
and note the marked maximum position
for each part.
12.
DO NOT use aggressive cleaning
products, such as detergents, to clean
the machine. Remove drops of sweat
from the machine immediately after
finishing training.
Please read these instructions carefully before using this
product and retain this manual for future reference.
The specifications of this product may vary slightly from the
illustrations and are subject to change without notice.
NOTE THE FOLLOWING PRECAUTIONS BEFORE ASSEMBLING
OR OPERATING THIS ELLIPTICAL CROSS TRAINER:
www.dkn-uk.com
3
