2019-08-30 TRITON 6M - User Manual.doc
page 13/23
To secure the traction unit to the stand, loosen the clamp from the traction unit. Fit the unit to the
stand and tighten the clamp. In addition, the traction unit can be secured onto the traction unit base
(pic. 9) by tightening the mounting screw (2) into the hole (1). The mounting screw is supplied with the
traction unit only.
Picture 9.
–Mounting the traction unit
6.5. Assembly of traction belt
CAUTION !
During the use of the traction belt, refer to the User Manual enclosed by the belt manufacturer.
The traction belt is fixed using the designated hook. It is placed in the headrest hinge plate (pic. 10 -
A). Before attaching the traction belt, remove the upholstered cap which is attached magnetically.
Then the traction belt hook can be attached.
Upholstered cap mounted - work on the table without
the traction belt attached.
Upholstered cap removed - work on the table with
the traction belt attached.
Picture 10 - Location for the traction belt hook