dji XP3.1, Руководство пользователя

Страница: 19 / 48

19
No GPS & Compass
cannot work normally if
access to other ports.
battery and the port. The controller system is supplied by the 7.4v battery. The
switch on Adapter is the power switch of control system.
5.
【Connection between LED Status Indicator and Adapter】：Connect LED
status indicator (Figure 3.20) to the interface of the status indicator on the
Adapter according to the corresponding joint of the status indicator (Figure 3.
21) please install the indicator in the place where can be seen easily from
different directions when helicopter flying. Users can refer to the following
graphic (Figure 3. 22).
Figure 3. 20 Figure 3. 21
Figure 3. 22
6. 【 Connection between the External GPS &
Compass and Adapter 】： There are four
extended ports on the Adapter to connect
some relevant airborne modules such as the
external GPS &Compass, wireless video transmission (matching), ground
station radio (professional edition matching) and so on.
No. 1 port is the input
port for GPS & Compass signal (Figure 3. 24
)
. The upper surface (DJI trademark
surface) of GPS & Compass should be upward. It should be laid flat in the