dji XP3.1, Руководство пользователя

Страница: 22 / 48

22
please alter the swash type in remote controller to helicopter-Normal one.
That’s means, each servo link to the swash plate independently.
Note
：
○
1
：
JR RC: Choose NORM in SWASH TYPE
Futaba RC: Choose HELICOPTER, H-1 in PARAMETER
2. 【Autopilot Switch Setting】：Users need to set a two-position self-convenient
switch on RC as the autopilot switch to switch between manual mode and
autopilot mode
Attention：
If users make connections according to the above explanation completely,
the channel 5 of JR RC is the autopilot setting channel, while the channel 7of
FUTABA RC.
3.2.3 Completion of the First Test Flight Adjustment by Software Wizard
Users can turn on the control system power (Don’t turn on the servo’s power)
after finishing preparation and remote control setting. Enter the software adjustable
interface after the normal starting of the system. When the indicator on the left of
the window turns to green from red, the software begins to work. And then, users
can enter adjusting wizard interface (Figure 3. 29) by single-click “Wizard” button
upleft (Figure 3. 28).
Figure 3. 28