dji XP3.1, Руководство пользователя

Страница: 31 / 48

31
Figure 3. 39
Figure 3. 40
Attention：
Make sure the duration of the stick at the endpoint more than 2
seconds.
c) Users push the stick and check if the directions of stick is the same as
shown in software.(stick to left or upward corresponds the slide shown in
software moving upward; stick to right or downward corresponds the
slide shown in software moving downward). If calibrated correctly, the
top or the left end of the stick should correspond the top position of the
slide. Meanwhile, the bottom or the right end of the stick should
correspond the bottom of the slide. If the slide reaches the top or
bottom too early, or it cannot reach there, re-calibration is needed.
d) Feedback Test.
¾
Switch the remote controller to auto mode or the prompt box will
appear (Figure 3.41).
¾
Click “Feedback Test” button.
¾
Now, users need to check the swash plate. The swash plate will
move automatically. The directions as followings: collective pitch:
up—down; swash plate tilting: front- back-left-right; Rudder: