dji AGRAS MG-1, Руководство пользователя

Страница: 26 / 31

AGRAS MG-1 User Manual
© 2016 DJI. All Rights Reserved. 26
Flight
Starting and Stopping the Motors
The Combination Stick Command (CSC) listed below is used to start/stop the motors. Ensure you perform the CSC
in one continuous motion.
Starting the Motors
Perform the CSC command. The motors will begin to speed at an idle speed. DO NOT perform the CSC command if
you will not fly the aircraft within a short time. Otherwise the aircraft may drift which can cause damage or injuries.
CSC 1 CSC 2 CSC 3 CSC 4
Stopping the Motors
There are two methods to stop the motors.
Method 1: When the M100 has landed, push the throttle stick down, then perform the CSC command to stop the
motors. Release both sticks once the motors have stopped.
OR OR
Method 2: When the aircraft has landed, push the throttle down and hold. The motors will stop after 3 seconds.
Method 2 is not available for stopping the motors when the Flight Mode Switch is toggled to Manual Flight Mode
and it is set to Manual not Attitude.