dji AGRAS MG-1, Руководство пользователя

Страница: 11 / 31

AGRAS MG-1 User Manual
© 2016 DJI. All Rights Reserved. 11
remote controller is linking to the aircraft. The Status LEDs will glow solid green when linking is complete.
4. Repeat Step 2 to turn off the remote controller.
Charging the Remote Controller
Charge the remote controller using the included charger. Refer to the figure below for more details.
Controlling the Spray System
Adjust the flying speed, record Point A and B, start or stop spraying, adjust spray speed, choose the route direction
via the Flying Speed Dial, Button A / B, Spray Button, Spray Speed Dial, Button C1 / C2.
[1] Flying Speed Dial
In Smart Operation Mode, turn and press the dial to adjust the flying speed. You can set four speed gears in the A2-
AG Assistant. The four speed gears are set to 3, 4, 5, 6 m/s by default, and the initial flying speed is the speed of the
first gear. Move the dial to the left and press the dial to change to the previous speed. Move the dial to the right
and press the dial to change to the next speed. The operation status display panel will indicate the current speed
gear.
The final movement of the dial before you press the dial will be used to set the flying speed.
[2] Button A
Press the button to record Point A of the Smart Operation route.
[3] Button B
Press the button to record Point B after Point A recorded.
[4] Spray Button
In Manual Operation Mode, press the button to start or stop spraying.
[5] Spray Speed Dial
In Manual Operation Mode, turn the dial to adjust the spray speed. Move the dial to the left to reduce the spray
speed. Move the dial to the right to increase the spray speed. The speed range is 40% - 100%*. The Operation Status
Display Panel will indicate the current spray speed. Refer to Operation Status Display Panel for detail. The spray
[1]
[2]
[5]
[4]
[3]
[6]
[7]
Charger
Power Outlet