dji AGRAS MG-1, Руководство пользователя

Страница: 16 / 31

AGRAS MG-1 User Manual
© 2016 DJI. All Rights Reserved. 16
x1
……
70%
～
75%
……
75%
～
80%
80%
～
85%
x1
……
85%
～
90%
x2
……
90%
～
95%
95%
～
100%
[6] Relative Altitude
Display the relative altitude between the aircraft and the crops (or the surface under the aircraft). See the table
below for details. (The bottom is LED1 and the top is LED4.)
LED is on. LED is blinking. LED is off.
LED1 LED2 LED3 LED4 Relative Altitude
< 2 m
2 m
2.5 m
3 m
3.5 m
4 m
> 4 m
[7] Flying Speed
In Smart Operation Mode, displays the current speed gear. You can set four speed gears in the A2-AG Assistant.
Select the speed gear via the Flying Speed Dial on the remote controller. The number (1 to 4) of the LED(s) that is
(are) on indicates the current speed gear (the first to the fourth gear).
[8] Return LED
In Smart Operation Mode, if the task resumption function is initiated, the flight controller will record a breaking
point. After breaking, the aircraft will return to the point and the Return LED will be on during the procedure.
[9] Continuous Smart Operation LED
In Smart Operation Mode, when the aircraft is hovering at the key point, press and hold Button C1 and C2 together
for more than 2 seconds until there is a beep emitted from the remote controller, and the aircraft will enter
Continuous Smart Operation Status. This LED will be on. Refer to Smart Operation Mode for more details.
[10] Spray LED
The LED is on when the aircraft is spraying liquid.
[11] Liquid Level
The LED is solid green when there is liquid in the liquid tank. The LED is blinking red when there is no liquid in the
liquid tank.