23
FrEE - FREE VEND ENABLE
This function is used to allow 14 select or less venders to be set on free-vend using a mechanical switch. The free-vend enable must be
turned on for the switch to allow free-vend, and a free-vend switch kit must be installed. (Contact Dixie-Narco Factory Service for
information on the free-vend switch kit.)
Press Select Button 1:
Toggle free-vends on (enabled) and off (disabled).
Press Select Button 2:
To Display number of free-vends.
Press Select Button 3:
To clear or reset the free-vend counter.
Press and hold select buttons 1+2 simultaneously to move to the next item on menu.
rtn - RETURN:
This function is used to return to the User Options Menu.
Press select buttons 1+2 simultaneously to move to "rtn".
Press select button 1 to return to "USEr".
Press & hold select buttons 1+2 simultaneously to move to the next item on menu.
dIA6 - DIAGNOSTICS MENU
This function allows you to systematically diagnose problems related to the vender. To move to "AutO" press select button 1+2
simultaneously, to enter sub-menu press select button 1. The following are sub-menus of Diagnostics Menu: "SE- ", "nt-", "uS", "Cn", "nA"
,"dSP", "uErS", "undr", and "rtn".
"SE-"
- Select Switch Test
Press any select button, and the display will indicate the number of the select button pressed.
Press & hold select buttons 1+2 simultaneously to move to the next item on menu.
"nt-1" - Motor Test
Use this test to cycle any vend mechanism. Use the following select buttons to run this test.
Select Button
1
:
Press until desired vend mechanism # to run is shown on the display.
Select Button
2
:
Press to cycle the selected vend mechanism. The display will show "tEStin6" and the selected vend mechanism
will cycle.
Press & hold select buttons 1+2 simultaneously to move to the next item on menu.
"uS-" - Vend Sensor
This function allows you to check the alignment and proper functioning of the vend sensor. The display will change from
"uS-0" to "uS-1" as the sensor becomes blocked and unblocked.
"Cn" - Coin Mech Test
Use this test to test coin mech programming, coin chute work, and coin mech payout systems.
Insert coins. The value of coins will be reflected on display.
Press & hold Select Button
1
:
Displays the Coin Mechanism setting.
"ndb" - Multi Drop Bus interface
Press & hold Select Button
2
:
Returns the coins inserted
Press & hold select buttons 1+2 simultaneously to move to the next item on menu.
"nA" - Note Acceptor Test
Use this test to test acceptor function.
Insert note. The value of note will be reflected on display.
Press & hold Select Button 1:
Displays the Note Acceptor setting. ("LL" - low level or
"ndb" - multi-drop note acceptor)
Press & hold Select Button 2:
Stacks the note and cancels the credit shown on display.
Press & hold Select Button 3:
Returns the note and cancels the credit shown on display.
Press & hold select buttons 1+2 simultaneously to move to the next item on menu.
Содержание FLEXPAK 3000 DMV 72N
