Dixie Narco FLEXPAK 3000 DMV 72N Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 61

background image

16

rd - RESETTABLE DATA:

This section shows the user the vender accounting data since the time of the last counter reset. This data can be reset either from this menu
or by a DEX interrogation.

Press Select Button 1:

Shows the total cash collected since the last counter reset.

Press Select Button 2:

Shows the total number of vends since the last counter reset.

Press Select Button 3:

Shows the total number of vends by selection since the last counter reset. Each selection automatically
scrolls across the display.

Press Select Button 4:

This button zeros the resettable data described above. Hold button

"4"

for 5 seconds and "COUntErS

rESEt" will be displayed. At this time, all resettable data will return to "0".

Press & hold select buttons 1+2 simultaneously to move to next item on menu.

S-P - SET PRICE:

This function is used to set the price of each selection. When a select button is pushed, the price for that selection will be displayed. If the
button is held in, the price will increment or decrement. To change from increment to decrement, release the select button and push it again.
To set all selections for the same price: 1) set desired vend price on select button #1, 2) simultaneously push and hold select buttons 3+4 for
five seconds, this will change the vend price of all selections, both primary and secondary, to the price programmed to select button #1.
Note:

The Flexpak multi-pricing capability allows you to set all selections to any price in the range of $0.00 to $99.95.

Press & hold select buttons 1+2 simultaneously to move to next item on menu.

C-d - COIN DUMP/COIN FILL MODE:
C-d - COIN DUMP:

This section is used to dump coins from the coin mechanism while in "C-d" mode.

Press & hold Select Button 1:

Dump Nickels.

Press & hold Select Button 2:

Dump Dimes.

Press & hold Select Button 3:

Dump Quarters.

C-d - COIN FILL MODE:

This section is used to count coins loaded in the top (separator) of the coin mech. Insert coins in the top (separator) of the coin mech. The
total value of the coins will be displayed and will be counted in the DEX audit data, so the Flexpak controller knows exactly how much
change is in the coin mech.

Press & hold select buttons 1+2 simultaneously to move to next item on menu.

USEr - USER OPTIONS MENU

This function is used to configure the vender to operate in the fashion best suited for the vender location. To move to diagnostics (DIA6),
press & hold select buttons 1+2 simultaneously, to enter the sub-menus press select button 1. The following are sub-menus of the User
Option Menu: "StS", "tInE", "dAtE", "ESC", "Lan6", "PrOn", "Ecnt", "nF", "bILL", "LIn", "SEC", "FrEE", and "rtn".

«
...
14
15
16
17
18
...
»

Содержание FLEXPAK 3000 DMV 72N






























































Отзывы:

Нет отзывов

Похожие инструкции для FLEXPAK 3000 DMV 72N

PIXMA MX882 Series

Бренд: Canon Страницы: 80

MultiPASS C3500

Бренд: Canon Страницы: 47

Бренд: Canon Страницы: 24

Бренд: Canon Страницы: 212

Бренд: Janome Страницы: 59

Бренд: Janome Страницы: 42

Бренд: Janome Страницы: 5

Бренд: Janome Страницы: 42

Virtua Tennis 4

Бренд: Sega Страницы: 136

Бренд: Sport Squad Страницы: 17

Бренд: Cameo Страницы: 52

ULTRA-STITCH SM-1100

Бренд: Mueller Страницы: 28

Бренд: SWF Страницы: 74

LBH-1790A Series

Бренд: JUKI Страницы: 5

Бренд: JUKI Страницы: 33

HZL - 353Z Series

Бренд: JUKI Страницы: 78

Бренд: Bosch Страницы: 17

Бренд: Bosch Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды