Dixie Narco FLEXPAK 3000 DMV 72N, Программирование/Настройка/Конфигурация/Устранение неисправностей/Эксплуатация/Руководство по запасным частям

Страница: 10 / 61

10
FEATURES
DEX COMPATIBLE HAND-HELD INTERFACE
The vending industry (NAMA) has established an audit data protocol which is defined by DEX (Direct Exchange
of Data) and UCS (Uniform Communications Standards). This interface is a direct connection as defined by the
specification. The FlexPak

3000 has provisions for an internal and external connection. The external
connection provides a limited amount of information.
20 MODULE COMPATIBLE
The FlexPak

3000 cabinet controller is capable of driving up to twenty vend mechanisms independently. The
vend mechanism is 24V DC.
LOW VOLTAGE SELECT PANEL
The select panel consists of gold cross-point switches. The interface circuitry is located on the door control
board. The control board supports up to fourteen selections.
PROGRAMMABLE SPACE-TO-SALES
The programmable space-to-sales is a feature which allows modules to be assigned to select buttons. Modules
are dispensed evenly when more than one module is assigned to given select button(s).
SELECT PANEL OR HAND-HELD CONTROLLER PROGRAMMING
The FlexPak

3000 has the capability to be programmed through the select panel or through the DEX port on
the door control board with the same hand-held used to access the accounting data.
LED DISPLAY (LIGHT EMITTING DIODES)
Early displays consist of four characters, utilizing seven segment LED’s for each character, to provide an alpha-
numeric display. Current displays consist of four characters, utilizing fourteen segment LED’s for each
character, to provide an alpha-numeric display.
PRICE DISPLAY
If all selections are set at the same vend price in primary pricing and secondary pricing, the vend price is shown
on the display. If multi-pricing is used, pressing any select button shows the vend price of that particular
selection on the display.
SINGLE PRICE OR MULTI-PRICE VIA THE SELECT PANEL OR HAND-HELD
Prices for each selection can be programmed either through the front select panel or through the DEX hand-held
device. For single price configuration, each selection has to be programmed for the same price. To set all
selections for the same price:
1.) Enter "S-P" mode in the menu,
2.) Set desired vend price on select button 1,
3.) Simultaneously press and hold select buttons 3 and 4 for five seconds, this will change the vend
price of all selections to the price programmed to select button 1.