Dixie Narco FLEXPAK 3000 DMV 72N, Программирование/Настройка/Конфигурация/Устранение неисправностей/Эксплуатация/Руководство по запасным частям

Страница: 21 / 61

21
LAOS - LIMITED ACCESS ON SELECTION:
This function is used to set selection(s) which will be limited during certain periods of the day. To view the limited access on selection
condition, press any select button. The display will show "EnAbLEd SEL - #(s)" where # shows the selections that are set for limited access.
To change limited access on any selection, push and hold the desired select button until the message displayed is the desired limited access
condition for that selection.
EnAbLEd SEL - #(s) - Selection(s) displayed are on limited access.
EnAbLEd SEL - All selections are not on limited access.
Press & hold select buttons 1+2 simultaneously to move to next item on menu.
LAOd - LIMITED ACCESS ON DAYS:
This function is used to set the days of the week for limited access. To view the limited access on days condition, push and let go of any
select button. The display will show "EnAbLEd On dAYS - #(s)"
Day of Week:
Sunday
1 Wednesday 4 Saturday 7
Monday 2 Thursday 5
Tuesday 3 Friday 6
To change limited access on days:
To Add Days:
Push set-up switch, "Add" will appear on display. Push and hold any select button to scroll through days. Release select button at desired
day to turn on limited access. Push set-up switch to complete limited access on days decision. This must be done for each day to be added.
To Remove Days:
Push set-up switch, "Add" will appear on display. Push set-up switch again, "dEL" will appear on display. Push and hold any select button
to scroll through days. Release select button at desired day to turn off limited access on that day. Push set-up switch to complete limited
access on days decision. This must be done for each day to be removed.
NOTE: Only one limited access on days change may be made at a time. The set-up/audit/diagnostics switch must be pressed before and
after each change.
Press & hold select buttons 1+2 simultaneously to move to next item on menu.
PEr1 - PERIOD 1:
This function is used to set time to start and end limited access. To display PEr1 start time, push and let go of select button 1 or 2 . To
display PEr1 end time, push and let go of select button 3 or 4.
To Change:
PEr1 Start Time:
To change start time, hold select button
1 to change hours, and select button 2 to change minutes. The time will increment or decrement. To
change from increment to decrement, release the select button and push again.
PEr1 End Time:
To change end time, hold select button
3 to change hours, and select button 4 to change minutes. The time will increment or decrement. To
change from increment to decrement, release the select button and push again.
Note:
Start time has to be less than end time. You must set an on and off time when using PEr1.
Press & hold select buttons 1+2 simultaneously to move to next item on menu.
PEr2 - PERIOD 2:
Set time to start and end limited access the same as period 1.
Limited access can be enabled for two different periods in one day. Period 2 must be greater than period 1.
Press & hold select buttons 1+2 simultaneously to move to next item on menu.