Dixie Narco DPSL5 E, Техническое руководство

Страница: 8 / 77

PROGRAMMING
7
RD - Interval Data
This function shows the user the vender accounting data since the time of the last counter reset. This data can
be reset either from this menu or by a DEX interrogation.
Press Select Button 1: Shows the total cash collected since the last counter reset.
Press Select Button 2: Shows the total number of vends since the last counter reset.
Press Select Button 3: Shows the total number of vends by selection since the last counter reset. Each
selection automatically scrolls across the display.
Press Select Button 4: This button zeros the resettable data described above. Hold select button "4" for 5
seconds and "C RS” - COUNTERS RESET will be displayed. At this time, all resettable data will return to "0".
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
SP -
Set Price
This function is used to set the price of each selection. When a select button is pressed, the price for that
selection will be displayed. If the button is held in, the price will increment or decrement. To change from
increment to decrement, release the select button and press it again. To set all selections for the same price: set
desired vend price on select button #1, then simultaneously press and hold select buttons 3 & 4 for five seconds,
the display will show “SPS” - Single Price Set, this will change the vend price of all selections, both primary and
secondary, to the price programmed to select button #1.
Note: The SBC's multi-pricing capability allows you to set all selections to any price in the range of $0.00 to
$99.95.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
C-S - Cash Settings
CF - Fill Coin Mech:
This function is used to count coins loaded in the top (separator) of the coin mech. Press select button 1 will
enter “CF” - Fill Coin Mech. Insert coins in the top (separator) of the coin mech. The total value of the coins will
be displayed and will be counted in the DEX audit data, so the SBC controller knows exactly how much change is
in the coin mech.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
C-D - Dump Coin Mech:
This function is used to dump coins from the coin mechanism while in "CD” - Dump Coin Mech mode.
Press select button 1 to enter mode and the lowest coin value dispensable will show on the display. Press and
hold select buttons 1 & 2 simultaneously to scroll through the different coin values available to dump coins. Press
and hold select button 1 to dump the coins whose value is shown on the display. Press and hold select buttons 1
& 2 simultaneously until “RTN” shows on the display. Press select button 1 will return to “CD”.
CR - Coin Rules:
This function is used to allow the exact change condition to be turned on or off. When turned off, the controller
will not go in the exact change condition. This will allow bills or coins to be accepted regardless of the tube level
status of the coin mech. When turned on, the controller will set the exact change condition based on the ability to
pay back non-refundable currency. Coins, paper). To show current condition press select button 1. Press and
hold select button 1 to toggle “CR” on and off.
ESC - Escrow:
This function supports 4 (four) escrow options. Press select button 1 will enter mode and show current escrow
setting. Press and hold select button 1 will scroll through available Escrow options and set the escrow mode to
the setting displayed when select button 1 is released.
PR – Escrow to Price
The escrow condition is forced vend option 1("escrow to price"). All dollar bills will be stacked. No cancel
sale is allowed once minimum vend price is met or exceeded.
EP 2 – Escrow No Cancel