Dixie Narco DPSL5 E, Техническое руководство

Страница: 17 / 77

PROGRAMMING
16
Use this test to check coin mech, coin chute work, and coin mech payout systems.
Insert coins. The value of coins will be reflected on display. Press select button 2 will exit the test and return any
coins inserted and return to “CM”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
NA - Note Acceptor
Use this test to check note acceptor. Insert a bill. Bill will be held in escrow. Press select button 2 to stack the bill.
Press select button 3 to return the bill. After the note has been stacked or returned, the display will return to “NA”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
DSP - Display
Press select button 1 and the display segments will illuminate in a scrolling manner and return to “DSP”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
RLY – Relay:
available only when Environmental Controls are set to on.
CMP# - Compressor #
This function allows you to test the relay electronic control of the compressor.
CAUTION:
Disconnect power to the compressor before testing the compressor relay. Failure to disconnect
power to the compressor before testing the relay could result in damaging the compressor.
Press select button 1 and the display will show "CMP #". Press select button 1 to toggle the state of the relay.
Press select buttons 1 & 2 to scroll to “FAN #”.
FAN# - Fan #
This function allows you to test the relay electronic control of the evaporator fan.
Press select button 1 and the display will show "FAN #". Press select button 1 to toggle the state of the relay.
Press select buttons 1 & 2 to scroll to “LT #”.
LT# - Light #
This function allows you to test the relay electronic control of the lights.
Press select button 1 and the display will show "LT#". Press select button 1 to toggle the state of the relay.
Press select buttons 1 & 2 to scroll to “RTN”.
RTN - Return
Press select button 1 to return to “RLY”.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu
RTN - Return
Press & hold select button 1 to return to "Diagnostics".
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
AUTO - Auto Test
This function is used in Dixie-Narco’s manufacturing process and is not intended for use in the field. Its purpose
is a self-test routine to check the SBC components listed. For further details contact Dixie-Narco Factory Service.
RTN - Return
Press & hold select button 1 to return to normal operating mode.