Cx Series Operator’s Manual
Overview - 3
Intended Use
Intended Use
The C12x, C16x, C24x, and C30x pedestrian trenchers are designed to install buried service lines.
This machine is intended for operation only according to the instructions in this manual. Operate machine
in ambient temperatures from 15° to 115°F (-9° to 46°C) for electric start machines and 20° to 115°F
(-7° to 46°C) for rope start machines. Contact your Ditch Witch® dealer for provisions required for
operating in extreme temperatures. Use in any other way is considered contrary to the intended use.
These machines should be used with genuine Ditch Witch® chain, teeth, and sprockets. They should be
operated, serviced, and repaired only by professionals familiar with their particular characteristics and
acquainted with the relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function
properly or in accordance with the operating instructions. Modification of equipment should only be
made by competent personnel possessing knowledge of applicable standards, regulations, equipment
design functionality/requirements and any required specialized training.
Model
Max depth
Max width
C12x
24” (610mm)
6” (150mm)
C16x
36” (915mm)
6” (150mm)
C24x
36” (915mm)
6” (150mm)
C30x
48” (1.2m)
6” (150mm)
