Distech Controls EC-BOS-6AX, Монтаж и подключение

Страница: 1 / 28

EC-BOS-6
AX
MOUNTING AND WIRING INSTRUCTIONS
EC-BOS-6
AX
Mounting and Wiring Instructions
Part Number: 05DI-HIBS6AX-10 Revised: February 2008
1
Information and specifications published here are current as of the date of publication of this document. Distech Controls, Inc. reserves the right to change or
modify specifications without prior notice. The latest product specifications can be found by contacting our corporate headquarters. Products or features con-
tained herein may be covered by one or more U.S. or foreign patents. LON and L
ON
W
ORKS
are registered trademarks of the Echelon Corp. Niagara
AX
Frame-
work is a trademark of Tridium Inc. © 2008 Distech Controls, Inc.
This document covers the mounting and wiring of the EC-BOS-6
AX
series controller. It assumes that you are an engineer, technician, or
service person who is performing control system installation.
Instructions in this document apply to the following products:
Note
Not covered in this document is the Niagara
AX
software installation and configuration required for a
fully functioning unit. This includes setting host IP address and password, serial port configuration, and
other parameters. Refer to the
EC-BOS
AX
Install and Startup Guide for this information.
In addition, the mounting and wiring of EC-BOS-6
AX
expansion options are covered in separate
documents. See sections “About Expansion Options,” page 8, and “Related Documentation,” page 18.
These are the main topics included in this document:
•
Preparation, page 2
•
Precautions, page 4
•
Mounting, page 5
•
Board Layout, page 7
•
About Expansion Options, page 8
•
Wiring Details, page 11
•
Power Up and Initial Checkout, page 16
Also included in this document are several appendixes, as follows:
•
Using Status LEDs, page 19
•
Maintaining the EC-BOS-6
AX
, page 20
•
Replacement Parts, page 21
•
Certifications, page 24
•
Declaration of Conformity, page 25
Models
Models Models
Models Description
Description Description
Description
EC-BOS-6
AX
EC-BOS-6
AX
base unit controller, powered by
(either):
EC-NPB-PWR DIN-mountable 24V power module
EC-NPB-PWR-UN DIN-mountable 90-263VAC power module
EC-WPM- XX Wall-mount universal AC power adapter, with
different models available, where -
XX is either:
-US, -EU, or -UK (vary by AC wall plug).