Distech Controls EC-BOS-6AX, Монтаж и подключение

Страница: 2 / 28

EC-BOS-6
AX
Mounting and Wiring Instructions
Revised: February 2008 Part Number: 05DI-HIBS6AX-10
Preparation
Included in this Package
2
Preparation
Unpack the EC-BOS-6
AX
and power module (either EC-NPB-PWR, EC-NPB-PWR-UN or EC-WPM- XX ) and
inspect the contents of the packages for damaged or missing components. If damaged, notify the appropriate
carrier at once and return any damaged components for immediate repair or replacement. See
“Federal
Communications Commission (FCC)” on page 24.
•
Included in this Package
•
Material and Tools Required
Included in this Package
Included in this package you should find the following items:
•
a EC-BOS-6
AX
base controller.
•
These EC-BOS-6
AX
Mounting and Wiring Instructions , Part Number: 05DI-HIBS6AX-10
•
a packing slip, which lists the factory settings for IP address, machine name, and host logon.
•
a hardware bag containing the following items:
–
A grounding wire, with quick-disconnect 0.187” female connector.
•
a power module (if ordered), which is required for operation.
The power module can be one of the following:
–
EC-NPB-PWR: 24Vac in-line, DIN-mount capable, with grounding wire, or
–
EC-NPB-PWR-UN: 90-263Vac, DIN-mount capable, with grounding wire
–
EC-WPM- XX : External wall-mount power adapter (input: 90–254Vac, 50–60 Hz, output: 15Vdc, 1A)
where XX varies by the AC wall plug (for installation locale):
EC-WPM-US (U.S. or Japan installations)
EC-WPM-EU (European installations, type “C” plug)
EC-WPM-UK (United Kingdom installations, type “B” plug)
Material and Tools Required
The following supplies and tools may be required for installation:
•
DIN rail, type NS35/7.5 (35mm x 7.5mm) and DIN rail end-clips (stop clips), recommended for any
installation that includes a power module and/or optional I/O modules.
Note
Length of DIN rail is determined by the number of optional DIN-mounted options.
See Figure 1 on page 6 for more details.
•
If using an EC-NPB-PWR power module, either one of the following:
–
UL listed, Class 2, 24Vac transformer, rated at minimum of 8.5VA to 20VA. Note that a dedicated
transformer is required (cannot also power additional equipment).
–
24Vdc power supply, capable of supplying at least 1A (24W).
•
If using an EC-NPB-PWR-UN power module, the following:
–
UL listed, Class 2, 90-263Vac transformer, rated at 40VA. Note that a dedicated transformer is
required (cannot also power additional equipment).