Dish Network Solo 301, Руководство пользователя

Страница: 19 / 106

Page 14
Chapter 2
Parts of the System
C
HECK THE
D
EVICE
C
ODES
You can find out what device code you’ve set for each remote mode.
5. Press the either the UP or
DOWN ARROW button
repeatedly until the device
turns off.
As you press the UP or DOWN
ARROW button, the remote is
trying each code in the memory to
see if it can turn off your device.
When the device turns off, you have
found a code that might work.
Note
: The mode button for the
device will flash rapidly eight times
when you’ve scanned all the codes
for that device.
6. Press the
POUND
(
#
) button. This stores the code you found.
7. Turn the device back on and
try some other buttons to
make sure they work.
Press the POWER button to turn the
device back on. Try some other
buttons to make sure they work.
Sometimes, the
POWER button
works when other buttons don’t.
8. Repeat this procedure until
you’ve tried all the codes.
You may need to repeat the scan to
find the best code for your device.
1. Press and hold the mode
button until all the other mode
buttons light up, and then let
go of the button.
The mode button flashes.
For example, hold the TV mode
button for a TV until all of the other
mode buttons light. When you let
go, the
TV mode light will flash.
2. Press the POUND ( # ) button
twice. Watch the mode light to
determine your code. The
mode button flashes the
number for each digit of the
device code, with a pause
between the groups of flashes.
A quick flash is for zero.
For example, if the code is 570, the
mode button flashes five times,
pauses, flashes seven times, pauses,
and flashes once quickly.
For
AUX
mode only . The first
group of flashes tells you
what the
AUX
mode controls.
A quick flash (zero) before
the three-digit code is for a
TV; one regular flash is for a
VCR or DVD player; and two
flashes is for a tuner, or
amplifier.
For example, if the TV code is 570,
the
AUX
mode button flashes once
quickly (indicating
0
for TV),
pauses, flashes five times, pauses,
flashes seven times, pauses, and
flashes once quickly.
Tip: This
procedure
explains how to
find out the device
code you set for
each remote
control mode.