Dish Network Solo 301, Руководство пользователя

Страница: 17 / 106

Page 12
Chapter 2
Parts of the System
L
IMITED
M
ODE
You can program your remote control in limited mode to keep from accidentally
changing the channel on your TV or VCR. When you use the remote to control
your TV in limited mode, you will only be able to use the
POWER
,
MUTE
,
and VOLUME buttons. Also, when you use the remote to control your VCR in
limited mode, you will only be able to use the
POWER
and
VCR
tape control
buttons.
The section Set Up the Remote Control has a step that tells the remote control to
go into limited mode.
Note : Limited mode is not used with amplifiers.
S
ET
U
P THE
R
EMOTE
C
ONTROL
You can set up the remote to control other devices using the device codes listed
on page 65.
1. Turn the device on. Use the device’s front panel buttons
or its remote control.
2. Find the brand name of the
device in the tables starting on
page 65.
If the brand isn’t listed, see Scan for
Device Codes on page 13.
3. Press and hold the mode
button until all the other mode
buttons light up, and then let
go of the button.
The mode button flashes.
For example, hold the TV mode
button for a TV until all of the other
mode buttons light. When you let
go, the
TV mode light will flash.
4. For AUX mode only . Press 0
for a second TV, or 1 for a
VCR or DVD player, or 2 for
a tuner, or amplifier.
This step is for programming which
kind of device that should be
programmed in
AUX mode. If
you’re not programming in AUX
mode, skip to step 5.
5. Enter one of the three-digit
device codes from the table
using the number buttons.
The three-digit device code should
be for the brand name of your device
that you found in step 2.
6. If you want to program
limited mode, press 1 . If not
skip to step 7.
See Limited Mode for more
information.
7. Press the
POUND
(
#
) button.
If you are programming a TV/
VCR or TV/DVD
combination, repeat step 3
with the remote control in
VCR
mode.
If you entered the code correctly, the
mode button flashes three times.