Dish Network Solo 301, Руководство пользователя

Страница: 18 / 106

Page 13
Control Other Devices with the Remote
Page 13
S
CAN FOR
D
EVICE
C
ODES
If the code for your device is not listed in the tables starting on page 65, use
this procedure to scan the remote control’s memory for the device code.
8. Press the POWER button to
turn off the device. If the
device does not turn off, go to
step 10.
If the code works, the device should
turn off.
9. Turn the device back on and
try some other buttons to
make sure they work. If the
code works for other buttons,
stop here.
Sometimes the
POWER
button
works when other buttons don’t.
10. If the code doesn’t work,
repeat steps 3 through 8 with
another device code from the
tables.
Try every code listed for your brand
until one works for your device.
11. If you can’t find a code that
works try Scan for Device
Codes below.
1. Turn the device on. Use the device’s front panel buttons
or its remote control.
2. Press and hold the mode
button until all the other mode
buttons light up, and then let
go of the button.
The mode button flashes.
For example, hold the
TV
mode
button for a TV until all of the other
mode buttons light. When you let
go, the
TV
mode light will flash.
3. For
AUX
mode only . Press 0
for a second TV, or 1 for a
VCR or DVD player, or 2 for
a tuner, or amplifier. Press the
STAR
(
*
) button.
This step is for programming which
kind of device that should be
programmed in
AUX
mode. If
you’re not programming in
AUX
mode, skip to step 4.
4. Press the POWER button. This puts your remote in the scan
mode.