Software Installation
13
© 2005 ... Directions Ltd
this value and the current vehicle speed is 5x greater than the minimal speed then a position will
be sent
Minimal speed to send data packets
- if the vehicle if moving at less than this amount of km/h do
not send positions
but send at least one position each
- send a position every X seconds even if the above
conditions are not met.
Time to wait for valid GPS data
- if the VTU is in sleep mode and wakes to send a position as set
in
but send at least one position each
, then it should go back to sleep after X number of seconds
Send position even if GPS position is not valid
- send position even if there is no signal from the
GPS antenna. This is only useful if you need information about a vehicle even if you do not have
a position (for example inputs)
Advanced
Sleep parameters
- we recommend that you only change the
GPS falls asleep after
parameter
GPS falls asleep after
- unit will switch to sleep mode if stationary for more that this number of
minutes (1440 minutes is 1 day)
when sensitivity level is lower than (0-255)
- unit will wake up when the vibration sensor reports a
value greater that this.
Stay awake when speed is greater than (km/h)
- do not switch to sleep mode if the GPS reports
