Vehicle Tracking quick start guide
2
© 2005 ... Directions Ltd
2.2
Inserting a SIM card
Before you start with hardware installation, you will need to insert a SIM card first.
If this has been done by
your supplier, please skip this chapter.
1)Inserting the SIM card
a)make sure that the unit is disconneted from the elecrical supply
b)make sure that the PIN number is either disabled or set to 0000. This is most easily done using a mobile
phone.
c)insert your SIM as per picture below
d) if your unit does not have a slot in the casing, unscrew the four screws at the bottom of the Tracking
Unit and open it
e)insert your SIM card as per picture
f)assemble the Tracking unit – do not over tighten the screws as you could damage the plastic casing
