Software Installation
11
© 2005 ... Directions Ltd
through this program or by calling the unit from the phone set in SMS Alert phone number. To
deactivate the geofence you must call it again from that phone. If the car moves without
deactivation it will send you an alarm SMS message.
Active
- enable the alarm geofence
Radius
- the distance that vehicle has to move from the position where the alarm was set before
it triggers the alarm SMS message.
SMS Alert phone number
- An alarm SMS will be sent to this phone number when the alarm is
triggered. This phone with this number can also be used to activate/deactivate the alarm (4 rings
indicates activation, 1 ring deactivation).
Alarm geofence text
- set your own custom SMS alert message in the text box. Please note that
coordinates are automatically sent with the message.
Alarms
- the unit can also send alarm SMS messages to the Alarm SMS Alert phone number on
the following criteria:
Power off
- send an alarm SMS if the unit is disconnected from the power supply (the internal
battery must be charged which may take up to 3 days)
GPS disconnect
- send an alarm if the GPS antenna is disconnected from the unit
Alarm when input 1 turns
- trigger an alarm when the binary input 1 changes state to on or off.
Select never if you do not want to send alarms on input 1.
Alarm when input 2 turns
- trigger an alarm when the binary input 2 changes state to on or off.
Select never if you do not want to send alarms on input 2.
Speed above
- send an alarm when the vehicle exceeds the stated limit in km/h.
GPRS
