9
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
the siren has been sounding, press
on the transmitter to stop the
trigger and return the unit to the armed state. The system will not dis-
arm, but rather reset. This prevents you from disabling the system
should you wish to silence it without visually checking the vehicle. After
resetting the system, press
again to disarm the system.
transmitter chirp muting
To temporarily turn off the arm or disarm chirps, use transmitter chirp
muting. Simply press
on the transmitter, and the confirmation
chirp(s) will be eliminated for that one operation only. The parking
lights will flash to confirm the arm/disarm command. If you want the
arm/disarm chirps turned off permanently, please refer to the
User-
Selectable Features
section of this guide.
transmitter sensor disable
To temporarily disable a sensor input, arm the system, press
twice and then
. The lights will flash four times and
all warn away trigger zones one, three, and eight are bypassed. Press
the buttons again; the lights flash four times and both warn away and
full trigger zones one, three, and eight are bypassed until the system is
disarmed. This can be performed anytime the system is armed.
1.
Arm the system.
2.
Press
twice and then
.
3.
The lights will flash four times; all warn away zones are now
bypassed.
4.
Transmit the sensor bypass channel again.